1, Prior to the demolition of the laptop's keyboard still have to point out first win, then all the screws next to the battery and screwed down below. Then open the laptop screen to the maximum angle, parallel to the laptop finally host.
2, Marked in red laptop switch bezel, while the switch baffles start to pry up, then slowly swung to the other side pull to the above, the switch strips can win here.
3, After the switch baffles to win, here is the screw on the switch side of the circuit board and keyboard fixed place, above the keyboard there are two screws, unscrew the keyboard will be able to loosen up. But remember there are cable laptop keyboard below, must not be broke.
4, To this point, the laptop's keyboard has been able to win, and replace the keyboard installation can reverse view.
No comments:
Post a Comment